Team Associated RC8.2e - Manual (Page 32)

32
:: Wheels, Tires, and Body Install (cont.) - Bag L
:: Wheels, Tires, and Body Install - Bag L
Body :
Your RC8.2e comes with a clear
polycarbonate body. You will need to
prep the body before you can paint
it. Wash the inside thoroughly with
warm water and liquid detergent.
Dry using a clean, soft, lint-free
cloth. Use the supplied window
masks to cover the windows from
the INSIDE. Using high quality tape,
apply to create a design to the
inside of the body. Spray (either can
or airbrush) the paint to the inside
of the body (NOTE: use ONLY paint
that is recommended for use with
(polycarbonate) plastics. If you don’t,
you will destroy the plastic body!!!!).
(RC cars get painted from the in-
side).
After painting, cut the body along
the trim lines. Make sure to cut
holes for the engine head, body
mounts, antenna, fuel tank lid, top
end adjustment needle and muffler
outlet.
Tires: (not included in kit)
Your tires need to be glued to the
wheels using a fast-curing Tire glue
(CA) (AE Pt#1597). This is available
at your local hobby shop. Make sure
to clean the mounting surface of the
tire with alchohol for best adhesion.
31531
3x6mm
bhcs
Jconcepts
Illuzion RC8.2e
Punisher body
# - 0224
(sold @jconcepts.net)
2208
Large
hood
pins
89094
Wheel
hex nuts
89296
83mm
wheel
(white)
x2
x4
x4
Note: tires and
inserts not included
in kit.
!
#1597
CA tire glue