Dow FROTH-PAK Refill Systems - Manual (Page 36)

In the U.S.
The Dow Chemical Company
Dow Building Solutions
1605 Joseph Drive, 200 Larkin Center
Midland, Michigan 48674
Technical Information:
1-866-583-BLUE (2583) (English)
1-800-363-6210 (French)
Sales Information:
1-800-232-2436 (English)
1-800-565-1255 (French)
dowbuildingsolutions. com
sprayfoamatdow.com
In Canada
Dow Chemical Canada ULC
Dow Building Solutions
Suite 2100, 450 – 1st St., SW
Calgary, AB T2P 5H1
nOTiCe: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time,
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compli-
ance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may
not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document. References to “Dow” or the “Company” mean the Dow legal entity selling the products to
Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
dow Polyurethane Foam insulation and Sealants
CAUTION: When cured, these products are combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not expose to temperatures above 240ºF (116ºC). For more information,
consult SDS, call Dow at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400 in the U.S. or 1-519-339-3711 in Canada. When air sealing buildings, ensure
that combustion appliances, such as furnaces, water heaters, wood burning stoves, gas stoves and gas dryers are properly vented to the outside. See website: http://www.epa.gov/iaq/homes/hip-ventilation.html.
In Canada visit: http://archive.nrc-cnrc.gc.ca/eng/ibp/irc/bsi/83-house-ventilation.html.
Read the instructions and (Material) Safety Data Sheet ((M)SDS) carefully before use. FROTH-PAK™ spray polyurethane foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Do not breathe vapor
or mist. Use only with adequate ventilation. It is recommended that applicators and those working in the spray area wear respiratory protection. Increased ventilation significantly reduces the potential for isocyanate
exposure, however, supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a particulate filter may still be required to maintain exposure levels below ACGIH, OSHA, WEEL or
other applicable limits. For situations where the atmospheric levels may exceed the level for which an air-purifying respirator is effective, use a positive-pressure, air-supplying respirator (air line or self-contained
breathing apparatus). Spraying large amounts of foam indoors may require the use of a positive pressure, air-supplying respirator. Isocyanate is irritating to the eyes, skin and respiratory system, and may cause
sensitization by inhalation or skin contact. FROTH-PAK™ foam will adhere to most surfaces and skin. Do not get foam on skin. Wear protective clothing (including long sleeves), gloves, and goggles or safety glasses.
Cured foam must be mechanically removed or allowed to wear off in time. The contents are under pressure. FROTH-PAK™ foam should not be used around heaters, furnaces, fireplaces, recessed lighting fixtures or
other applications where the foam may come in contact with heat-conducting surfaces. Cured FROTH-PAK™ foam is combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not
expose to temperatures above 240°F.
Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not
develop in any specific system.
POWERBLANKET is a trademark of Flatworks Technology.
®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow
GMID 11003018
Form number: 178 04010 -0614 CDP Published June 2014
Form number: 179-04571-0614 CDP