Installing cablerail by feeney, For azek rail – AZEK Rail User Manual
Page 18
Page 18
Installing CableRail by Feeney
®
for AZEK Rail
ATTACH QUICK-CONNECT AND QUICK-CONNECT CABLE FITTINGS
6
• Use a set of 3/8” open-ended wrenches to tighten the Cable
using the “swivel” end insuring the Cable does not twist.
• Once the Cable is tight, tighten the lock nuts against the
Quick-Connect swivel fitting.
If necessary, the Cable can be
removed from the Quick-Connect
fitting by using the
Quick-Connect Release Tool.
Tightening Order