AZEK Rail - Manual

AZEK Rail
Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS
Installing AZEK Rail with CableRail by Feeney® .......................................................................... 1
Installing CableRail by Feeney® for AZEK Rail ........................................................................... 7
Installing AZEK Rail Stairs with CableRail by Feeney® ............................................................10
Installing CableRail by Feeney® Stairs for AZEK Rail ...............................................................14
Notes .................................................................................................................................................... 18
• Please read all instructions completely before starting any part of the installation.
• AZEK Rail should be installed using the same good building principles used to install wood or composite
railing and in accordance with the local building codes and the installation guidelines included below.
AZEK Building Products Inc. accepts no liability or responsibility for the improper installation of this product.
• AZEK Rail may not be suitable for every application and it is the sole responsibility of the installer to be sure
that AZEK Rail is fit for the intended use. Since all installations are unique, it is also the installer’s
responsibility to determine specific requirements in regards to each Rail application.
• AZEK Building Products Inc. recommends that all applications be reviewed by a licensed architect, engineer
or local building official before installation. If you have any questions or need further assistance, please call
AZEK Customer Service at 877-ASK-AZEK (877-275-2935) or visit our website at www.azek.com.
• AZEK Railing is tested as a whole system and should be used that way. It is not intended to be used in
conjunction with other railing systems or fasteners.
• The following Installation Guidelines are applicable for installation of AZEK Premier, AZEK Trademark, and
AZEK Reserve Rail Systems (except AZEK Reserve over post applications).
• IMPORTANT: Make sure the DRIVE TOOL/DRILL is configured or set to use the SCREW setting when driving
and/or tightening all FASTENERS.
• SAFETY: Always wear goggles when handling, cutting, drilling and fastening materials.
• Failure to install this product in accordance with applicable building codes and AZEK’s written Rail Install
Guide may lead to personal injury, affect rail system performance and void the product warranty.