Troubleshooting, Continued) video – Vaddio HE120 Operating Instructions User Manual
Page 45
45
Reference
Operating
Instructions
Troubleshooting
(continued)
Video
Symptom
Cause and remedial action
Reference
pages
No pictures are
displayed or the
pictures are disturbed
Has the unit been connected properly to the other connected
devices?
P.18 to 21
If the system is configured in such a way that the picture is also
switched when the unit to be operated is selected, has the correct
unit been selected?
Settings> P.9 Has the video signal setting been selected correctly? Settings> P.46, P.72 Are external sync signals that are supported by the video signal P.36 The picture is flipped Has the stand-alone (Desktop) installation setting been selected Settings> P.48, P.73 Multiple color bands Switch to the camera picture. Settings> P.13 The menu screen is Exit the camera menu. Settings> P.29 to 36 It is difficult to view Depending on the HDMI monitor you are using, you may • The resolution of the characters in the camera menu displays • Depending on the edge enhancement setting established for the • Depending on the edge enhancement setting established for the ––– No auto focusing Is the focus set to manual? Auto focusing is initiated as soon as the focus is set to auto. Settings> P.13 In some situations, it may be hard to focus at the auto setting. In cases like this, select the manual setting, and focus manually. Settings> P.15 The subject is not Was the focus adjusted at the Tele end? First adjust the focus at the Tele end where the focusing accuracy is higher, and then proceed with the zooming. ––– Under some operating conditions, it may be hard to bring In such cases, use the focus at the auto setting. Settings> P.13
format which has been set being input?
vertically
correctly?
(color bars) are
displayed
displayed
the menu screens
experience one or more of the symptoms described below.
These symptoms are especially noticeable when any of the SD
formats is used: This is normal and not indicative of any trouble.
changes as the background image changes.
monitor, white lines appear in front of the black shadows of the
camera menus.
monitor, the background colors may be superimposed onto the white
parts of the camera menus.
brought into focus
during zooming when
the manual setting is
used for the focus
subjects into focus.