Asante Technologies 100 - Manual (Page 40)

Management
Page 3-28
Setting Port Security
The Port Security menu allows network managers to control access to
ports by specifying the physical addresses that are authorized to con-
nect to the ports. If an unspecified physical address attempts to con-
nect to a certain port, an action (such as automatic partitioning of the
port, sending of a trap, etc) can be specified to occur.
To set port security:
1
Do not select any item on the Device Page’s front panel
image. (This selects the entire hub stack.)
2
Click Port Security.
The Port Security Table appears, similar to Figure 3-25.
Figure 3-25 Port Security Table
3
Click the Add button.
The Add Dialog box appears, similar to Figure 3-26.
Figure 3-26 Add Port Security Dialog box
4
Enter the number of the group for which port security
information is to be set in the GroupIndex field.
100NMM PM book Page 28 Wednesday, August 27, 1997 12:40 PM