Asante Technologies 100 - Manual (Page 24)

Management
Page 3-12
Performing a Software Upgrade
An AsantéFAST 100 Hub stack’s software can be upgraded via IntraSpec-
tion.
To upgrade an AsantéFAST 100 Hub stack’s software:
1
Click Software.
The Software Upgrade table appears, similar to
Figure 3-11.
Figure 3-11 Software Upgrade table
2
Type the software’s file name and network path in the
Boot File Name field.
3
Type the server’s IP address where the software file
resides in the Server Address field.
4
Click Apply.
5
Reset the hub stack to initiate the downloading of the
software. See “Resetting a Group or Device” on page 3-
20.
Click Refresh to view updated information.
100NMM PM book Page 12 Wednesday, August 27, 1997 12:40 PM