Asante Technologies 100 - Manual (Page 36)

Management
Page 3-24
Setting Alarms
Alarm thresholds can help you locate problems or faults on the net-
work. When you set a threshold for an activity on a hub, you instruct
the hub to take a specific action when a value falls above or below the
set threshold.
This section explains how to set, delete, and modify alarm thresholds.
To add an alarm:
1
Do not select any item on the Device Page’s front panel image.
(This selects the entire device.)
2
Click Threshold.
The Alarm Threshold Table appears, similar to Figure 3-22.
Figure 3-22 Alarm Threshold Table
∆
Note: If there are no alarm thresholds set, the
table is empty.
3
Click Add to add an entry.
The Add Dialog box appears, similar to Figure 3-23.
Figure 3-23 Add Alarm Threshold Dialog box
4
Complete each entry as outlined on page 3-25.
5
Click Apply.
The alarm threshold is added. If it does not appear in the
Alarm Threshold Table, click
Refresh.
100NMM PM book Page 24 Wednesday, August 27, 1997 12:40 PM