Asante Technologies 100 - Manual (Page 23)

Configuring Device Identification Information
Page 3-11
Configuring Device Identification Information
To help with hub identification, you can add certain hub details; such
as, the hub stack’s physical address, name, location, and contact infor-
mation.
To configure device identification information:
1
Do not select any item on the Device Page’s front panel
image. (This selects the entire hub stack.)
2
Click Identify.
The Device Identification table appears, similar to Figure
3-10.
Figure 3-10 Device Identification table
3
Click once in the field to be edited.
For a description of each field, see “Identify “ on page 4-3.
▲ Important: Only those fields that are colored
white or that contain drop-down menus can be
edited.
4
Type the new information.
▲ Important: A maximum of 254 characters
(including spaces) is allowed.
5
Click Apply.
The identification information is edited. Click Refresh
to view updated information.
100NMM PM book Page 11 Wednesday, August 27, 1997 12:40 PM