HOUNO Visual Cooking I BPE - Manual (Page 31)

BPE - ver. 1.20 – Sept. 05 31
Cleaning of nozzle
The injection nozzle should be dismounted and cleaned according to requirement. The easiest way
to clean the nozzle is to let it soak in scale remover for approx. 6-8 hours.
When remounting the nozzle, the small notch should turn upwards, see illus.
Exterior cleaning
Wash the oven cabinet on the outside with soapy water and dry with a soft and damp cloth.
After drying, apply HOUNÖ STEEL OIL (follow directions on the packaging). The steel oil is
available from your oven supplier (0.5 litre: part No. 045650 – 5 litres: part No. 045654) and is only
for external use.
Note! The exterior of the oven must never be flushed with a water hose or high-pressure cleaner as
this may damage the electronic components.
Cleaning of exhaust valve
The exhaust valve (steel plug that opens and closes the damper) should be checked once a week.
Remove the valve, clean thoroughly with a brush and detergent, rinse with water, dry, and fit again.
It is very important to avoid the forming of a layer of fat on the valve, as the fat might affect the
valve’s ability to function.