HOUNO BPE - Manual (Page 6)

BPE – Ver. 1.5x – September 2007
6
Selects next mode to
the left
Temperature setting
(this side temperature
up, left side
temperature down)
Time setting (this side
time down, right side
time up)* Setting of core
temperature
Access to fan and
exhaust, see p. 6
Manual humidity
pulsing. Only active in
HOT AIR (A)
ON/OFF
Access to preset
programmes
Main switch
The white digits in the middle next to the symbols for TEMPERATURE and TIME show the
actual oven temperature and the actual time remaining. When there is one minute left, the
computer counts down from 59 seconds. The alarm sounds when time is up. The red figures
are the preset time and temperature.
When the oven is on (a programme or mode is active – the square flashes), it is still
possible to set TIME, TEMPERATURE, FAN and EXHAUST.
Note that the fan wheel is reversible. This means that the wheel runs clockwise as well as
counter-clockwise with a small interval when changing direction.
(A) has two functions: After the start in HOT AIR, you can add humidity manually by
pressing the key. If you press the key before the start in manual HOT AIR, a sub-menu
appears in which it is possible to set the humidity pulsing in seconds (1 – 99 seconds).
See p. 7.
* For continuous operation, press the left-hand key until the time indication disappears
completely.
Work menu
Access to main menu
Selects next mode to
the right