HOUNO BPE - Manual (Page 26)

BPE – Ver. 1.5x – September 2007
26
Cleaning behind filter housing
For thorough cleaning of the oven chamber, move the filter housing so that it becomes
possible to clean round the fan and heating elements.
Loosen the 2 screws (A) and (B) on the filter housing, turn the filter housing and clean behind
it. The filter housing can be dismounted entirely by lifting it upwards till it is clear of the pin at
the bottom and then tipping it.
Cleaning of jet heads
The jet head should be dismounted and cleaned regularly according to how often the combi
steaming and ClimaOptima modes are used. The easiest way to clean the jet head is to let it
soak in scale remover according to requirement. All ovens are supplied with an additional jet
head.
If the oven is equipped with the automatic cleaning system, CombiWash, there will be two jet
heads. The other jet head will be located to the right of or above the first one. This jet head
should also be checked/cleaned regularly.
Please note the position of the jet heads:
The jet head for steam / ClimaOptima
should be located with the notch
facing downwards (the long tube).
The jet head for CombiWash should
be located with the notch facing
upwards (the short tube).
(A)
(B)