HOUNO BPE User Manual
Page 5
BPE – Ver. 1.5x – September 2007
5
Start page, 2 of 2
The yellow frame
indicates current step
to be changed. Press
and change to
previous step.
Temperature down in
current step
The yellow frame
indicates current step
to be changed. Press
and change to next
step to the right.
Time down in current
step
Temperature up in
current step
Access to menu for
setting of fan and
exhaust
Time up in current step
Start programme (A)
If TIME, TEMPERATURE and MODE are OK, press (A). Programme starts.
Note: Most programmes have a PREHEATING mode followed by STOP and an
alarm. This means that the products should not be loaded into the oven until this
step is completed and the alarm sounds. Open door – load oven – close door. the
programme continues
If you wish to make permanent changes to programmes, see page 14 – 19.
Access to menu for
setting of core temp.
(optional extra)