screen. Various settings can be changed on the menu screen.
* After you change the setting, be sure to press the MENU button to register it.
* Leaving the menu screen without any operation for 1 minute returns to the measurement

screen.

Time zone list

Select the code for the city nearest from

your current location.

MODE

Switch the display

* For details, see “Time zone list”

(page 11).

Daylight saving time

Select whether to use the daylight saving

time.

ON Moves the clock 1 hour ahead

OFF Displays in regular clock

MODE

ON ↔ OFF

Clock setting

Change the settings of the time zone, daylight saving time, and the

clock display format.
* With this unit, it is not necessary to set the clock/date, since they

are synchronized after receiving GPS signal.

Clock display format

Select the display format of “12h” (12

hours display) or “24h” (24 hours display).

MODE

12h ↔ 24h

* Date and clock are acquired from GPS

signal; therefore, it is not necessary to

enter them.

MODE

MENU

MODE

MENU

MODE

Clock setting

(on the right of

this page)

Setting the tire

circumference

(page 31)

Pairing the sensor

(page 32)

Measurement

screen

Night-time setting

(page 34)

Setting the

record interval

(page 34)

Entering the

total distance

(page 34)

Selecting the

speed unit

(page 35)

From “Selecting the speed unit” (page 35)

To “Setting the tire circumference” (page 31)

(press & hold)

(press

& hold)

Menu top screen

(press

& hold)

Register

the setting

Register

the setting

Changing

the settings

(press & hold)

Changing the time zone
(shortcut)

When you travel back

and forth between two

regions, you can easily

return the time zone to

the original one.
* For details, see

“Changing the time

zone” (page 30).

Press

and hold

for 4 sec.