Functions available on the measurement screen, Starting/stopping measurement, Switching computer function – CatEye CC-GL50 [Stealth 50] User Manual
Page 15: Backlight
15
How to use the
computer
Functions available on the measurement screen
*1: When no cadence signal is received, 0 appears on the screen.
*2: When no heart rate signal is received, 0 appears on the screen.
*3: When Tm exceeds about 27 hours, or Dst exceeds 999.99 km, Average Speed cannot be
measured, while displaying “.E ”. Reset the data.
Starting/Stopping measurement
Caution:
Press and hold the MODE button to reset the computer before and after
measurement.
Measuring starts by resetting the computer. The unit keeps recording the
trip until it is reset. Turn off the unit when not in use.
Measurement starts/stops in sync with
the bicycle motion when the speed sensor
signal icon (
S
) flashes, or the GPS signal
receiving icon (
) lights up. The speed
unit flashes during measurement.
Switching computer function
Pressing the MODE button switches the measurement data in the lower display, in the order
shown in the figure.
Backlight
When using it during night-time, the backlight always lights up.
Example: Setting of the night-time: 7:00 PM to 6:00 AM
* The night-time can be set to your needs. For information on how to set the night-time, see
“Changing the computer configuration” (page 27).
* As default, it is set to 7:00 PM to 6:00 AM.
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Current speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
Speed sensor receiving icon
GPS signal receiving icon
Clock
0:00 – 23:59
[AM1:00 – PM12:59]
or Power
0 – 9999 watt
Selected data
Tm
Elapsed Time
0:00’ 00” – 9:59’ 59”
Dst
Trip Distance
0.00 – 999.99 km
[mile]
Heart rate (*1)
0 (30) – 199 bpm
Cadence (*2)
0 (20) – 199 rpm
Dst2
Trip Distance-2
0.00 – 999.99 /
1000.0 – 9999.9 km
[mile]
Av
Average Speed (*3)
0.0 – 105.9 km/h
[0.0 – 65.9 m/h]
Mx
Maximum Speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
Odo
Total Distance
0.0 – 9999.9 /
10000 – 99999 km[mile]
Clock
0:00 – 23:59
[AM1:00 – PM12:59]
The clock is displayed
after the total distance.
When the power signal is received
Starts measurement
Stops measurement
PM 6:59
AM 6:00
PM 7:00 – AM 5:59
A backlight is turned on
automatically