Panasonic -eng - Manual (Page 78)

78
Easy edit of image data on a PC Edit image data
Output images in MPEG2 format
1
Select the video for output in MPEG2 format in the
Image display area.
• To output a scene, select the scene in the Scene display
area.
• If multiple videos or scenes are selected, they are not
output in MPEG2 format.
2
Click the [Save as MPEG2] button.
It is possible to output selected videos and scenes in MPEG2 format.
Output data can be used to produce DVD-Video with DVD-Video production software.
Attention
z When outputting fast moving images in MPEG2 format, the
contours may be out of focus or noise may occur when
converting images. When converting fast moving images,
adjusting the [Quality preference] in the [Motion detection]
setting window may improve the quality.
( l92)
z If the images with 5.1 ch sound is output in MPEG2 format by
[Save as an original image], the aspect ratio will be 16:9 and
the sound will be 5.1 ch. If the software does not support this
format, copy or playback of the edited images might fail.
In this situation, output it by [Save as 2ch].
z Video consisting of both 5.1 ch-sound scene and 2 ch-sound
scene cannot be output in MPEG2 format. (The number of
channels can be confirmed in the [Properties] window.)
z An MPEG2 file cannot be recorded on media with this
software. To do this, use DVD-Video production software.
HDWriter25_eng.book 78 ページ ２００７年１２月２６日 水曜日 午後５時４７分