beautypg.com

Loopback modes – ADC H2TU-C-388 User Manual

Page 52

background image

Testing

152-388-100-02, Issue 2

44

June 6, 2000

H2TU-C-388 List 1

4

Have the CO tester send the NLOC (4-in-7) inband loopup for 5 seconds. You should be able to observe the
NLOC message on the front-panel display. (The Status LED on the front panel should be yellow, and the
loopback mode should also be identified on the Span Status screen.)

5

Repeat Step 2. If the test passes, the problem is in the downstream direction. If it fails, the problem is in the
upstream direction.

Figure 27.

Loopback Modes

See also other documents in the category ADC Hardware: