About the information in the following sections, Connecting to a hssi system (in-band), Hssi monitor connections – Agilent Technologies HSSI WanProbe J3916A User Manual

Page 76

Text mode
Original mode

Installation
Connecting the Probe

About the Information in the Following Sections

It is assumed that you understand the basic terminology and concepts of WAN
network test interfaces.

Comprehensive coverage of network test connections and physical layer testing is
beyond the scope of this Installation/User’s Guide. Consequently, the information
provided here covers only the basics, and only very common or generic
connection schemes are shown.

Connecting to a HSSI System (In-Band)

HSSI Monitor Connections

This section describes the basic connection method used to monitor the network
using the HSSI interface. Figure 3-9 on page 57 shows the HSSI system prior to
connecting the WanProbe.

Figure 3-8: Connecting the Probe Using Data & DB-9 Connectors