1] modify/view configuration values, 2] modify/view security values, 3] modify/view interface values – Agilent Technologies HSSI WanProbe J3916A User Manual

Page 41: 4] display interface summary, 5] tftp download new firmware, 6] xmodem download new firmware, 7] warm start and exit, 8] cold start and exit, Figure 2-2: probe main menu

Local Terminal Configuration

Using the Main Menu

NOTE

Item 5 (TFTP Download new firmware) is not displayed if the Allow TFTP
firmware downloads menu item is not enabled. Refer to “Modify/View Security
Values” on page 24 for more information on enabling this menu item.

If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.

Main Menu - Revision

[1]Modify/View configuration values ->

[2]Modify/View security values ->

[3]Modify/View interface values ->

[4]Display interface summary

[5]TFTP Download new firmware ->

[6]XMODEM Download new firmware ->

[7]Warm start and Exit

[8]Cold start and Exit

Figure 2-2: Probe Main Menu