Modify/view configuration values, Modify/view security values, Modify/view interface values – Agilent Technologies HSSI WanProbe J3916A User Manual

Page 122: Display interface summary, Tftp download new firmware, Xmodem download new firmware, Warm start and exit, Cold start and exit, Figure 6-1: probe main menu (hp-ux workstation)

Download New Firmware
Downloading Firmware using an HP-UX Workstation and a Terminal

102

NOTE

Item 5 in Figure 6-1 is not displayed if the Allow TFTP firmware downloads
menu item is disabled. Refer to “Modify/View Security Values” on page 24 for
more information on enabling this menu item.

If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.

2. Press

to display the Download Menu as shown in Figure 6-2.

Main Menu - Revision

1.Modify/View configuration values ->

2.Modify/View security values ->

3.Modify/View interface values ->

4.Display interface summary

5.TFTP Download new firmware ->

6.XMODEM Download new firmware ->

7.Warm start and Exit

8.Cold start and Exit

Figure 6-1: Probe Main Menu (HP-UX Workstation)