Agilent Technologies HSSI WanProbe J3916A - Manual (Page 49)

Local Terminal Configuration
Using the Main Menu
29
Link Speed Press 7 and select the Link Speed as Auto Negotiate,
10MB/s, or 100MB/s.
Parameters do not take effect until you select the Save Changes and Exit menu
item.
3. Press S to save your configuration changes and return to the Main Menu.
4. Press 0 to cancel your changes and return to the Main Menu.
Token-Ring Telemetry Interface Configuration
If the optional Token-Ring telemetry interface is not installed, skip this section
and continue with “HSSI WAN Interface Configuration” on page 33. Otherwise,
use the following procedure to configure items in the Modify/View Interface
Values menu for the Token-Ring Telemetry Interface:
1. On the Main Menu, Press 3, Modify/View Interface Values. You see the
Modify/View Interface Values menu (Figure 2-6).