Connecting gs-rams to the ramkeeper’s front – APPLIED ENGINEERING RamKeeper User Manual

Page 17

Text mode
Original mode

Note: If you’re connecting only one card and it
will work in the back pocket, you should install it
there as this is the easiest connection to make.
(Skip to step 10.)

Connecting GS-RAM Cards to the RamKeeper’s Front

Note: If you have a SlotMover, skip to the next
section.

To connect directly to the front of the RamKeeper, all GS-
RAM cards (except the GS-RAM REV A and the CS-RAM-
Plus REV A) require the male to male connector. (If
you’re using a GS-RAM REV A or a GS-RAM Plus REV A,
skip to step “C”.)

First, notice the white pegs in two holes of the
RamKeeper.

Note pegs in front connector

RamKeeper