APPLIED ENGINEERING RamKeeper User Manual
Page 16
7.)
Both of the wires that lead to the GelICell should
be disconnected. If they aren't, disconnect them
now.
Disconnect the battery wires
8.) Remove the RamKeeper from its anti-static bag.
Hold the card by its edges, like a photograph.
9.)
Connect your card or cards according to the
instructions below. Refer to the illustration
below for the proper connector and placement of
your card(s).
Slot Mover
RamKeeper
All
GS
-RAM cards
Back Pocket
(including 2 Meg Expander)
GS
-RAM REV C or later
Apple II
GS
Memory Expansion Card
GS
-RAM Plus REV D or later
RamPak 4
GS
GS
-RAM 2 Meg Expander
RamStackPlus
Apple II
GS
Memory Expansion Card
OnBoard
RamPak 4
GS
OctoRam Front Connector
RamStackPlus
All
GS
-RAM cards
On Board
(except 2 Meg Expander)
* Due to its large size,
OctoRam will not fit on the
back side of RamKeeper
RamKeeper Connections
Chapter One - Getting Started 7