Sony MZ-M10 - Manual (Page 79)

79
NO DIGITAL
COPY • You tried to make a copy from a disc that is protected by the Serial Copy
Management System. You cannot make copies from a digitally connected
source which was itself recorded using digital connection.
, Use analog connection instead (page 34).
NO DISC • You tried to play or record with no disc in the recorder.
, Insert a disc.
NO DISC
MEMORY • You tried to erase a setting in the Disc Memory on a disc that contains no
settings in the Disc Memory (page 57).
NO FILE • While viewing the file list, you selected a folder that have no folders or files
NO GROUP • You selected “Group Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
• You tried to release a group setting with a disc that has no groups.
, Insert a disc with group settings.
NO INPUT
SIGNAL • The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 21).
NON GROUPED
TRACK • You selected “Group Move” or “Group Erase”, or you tried to label a group
while selecting a track that does not belong to a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
NOT ENOUGH
POWER TO
EDIT • You tried to edit the contents of a 1GB Hi-MD disc with insufficient battery
power for editing (page 73).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
NOT ENOUGH
POWER TO
REC • You tried to record on a 1GB Hi-MD disc with insufficient battery power
for recording (page 70).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
NO TRACK • You tried to play a disc with no recorded tracks.
, Insert a recorded disc.
NO TRACK IS
SELECTED • You selected “Track Move” or “Track Erase”, or you tried to label a track
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
P/B ONLY DISC • You tried to record or edit on a premastered disc (P/B stands for
“playback”).
, Insert a recordable disc.
PC – – MD • The recorder is connected to the computer.
PROTECTED
DISC • You tried to record or edit on a disc with the tab in the record-protect
position.
, Slide the tab back (page 66).
PUSH STOP
BUTTON • You tried to open the lid by sliding the OPEN switch or operate the recorder
while the recorder was storing disc information with the supplied USB
cable connecting the recorder to a computer.
, Operation must be done only after pressing x and “SYSTEM FILE
WRITING” has disappeared from the display.
Message Meaning/Remedy