Sony MZ-M10 User Manual
Page 78
78
DATA SAVE
• The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
DC IN TOO
HIGH
• Voltage of the power supply is too high (The supplied AC power adaptor is
not used).
, Use the supplied AC power adaptor.
DISC FULL
• Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
DOWNLOAD
READY
• MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to
section.)
EJECT DISC OK • The recorder has finished communicating with the computer and it is safe
to eject the disc from the recorder or disconnect the USB cable.
END
• The recorder reached to the end of the disc while playing or pressing >.
ERROR
• There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76.
ERROR XX
• There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76. If the message
appears again, please consult your nearest Sony dealer.
FOLDER NO
EXPAND
• You tried to use the File List function to expand a folder that is already at
the 16th level.
, Files and folders can be expanded down to 16 levels. Expansion beyond
this level is not possible.
FORMAT
ERROR DISC
• A disc with a format that the recorder does not support was inserted.
, Insert a disc used in Hi-MD mode.
• A disc formatted on a computer was inserted.
, A disc formatted on a Windows or Macintosh computer cannot be used.
Format the disc on the recorder or with the SonicStage software.
GROUP FULL
• You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a disc used in MD mode.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a disc used in MD mode) on a disc. Keep the group
number within 255 or 99.
HOLD
• The recorder is locked.
, Slide HOLD against the arrow to unlock the recorder (page 18).
IN MENU
• You pressed a key on the remote control while selecting a menu on the
recorder.
LOW BATTERY • Batteries are weak.
, Charge the rechargeable battery or replace the dry battery (page 17).
MEMORY
OVER
• You tried to record with the recorder placed where it receives continuous
vibration.
, Put the recorder on a stable place, and start recording again.
NO
BOOKMARKED
TRACK
• You selected bookmark play without setting bookmarks.
, Set bookmarks (page 41).
Message
Meaning/Remedy