Sony MZ-M10 - Manual (Page 52)

52
Erasing tracks and the
entire disc (Erase)
Note that once a recorded item has
been erased, it cannot be recovered.
Make sure to confirm the contents of
the selected item before erasing it.
When erasing tracks that have
been transferred from the
Windows computer
When you try to erase tracks that have
been transferred from the Windows
computer, “TRK FROM PC ERASE
OK?” appears in the display. If you erased
tracks that have been transferred from the
computer, the transfer authorization of the
tracks will be as follows.
• If the tracks were transferred in Hi-MD
mode, the transfer authorization of the
tracks are restored automatically when
you insert the disc into the recorder and
then connect the recorder to the
computer.
• If the tracks were transferred in MD
mode, the transfer authorization of the
tracks is lost. If you do not want to lose
the transfer authorization, restore the
authorization by transferring the tracks
to the computer again before erasing
them.
You cannot erase non-audio data (for example,
text data or image data) on a disc used in Hi-
MD mode.
1
While playing the track you want to
erase, enter the menu and select
“Edit” - “Erase” - “Track Erase”.
2
Turn the jog dial to select “OK”, and
then press the jog dial to erase the
track.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
If all tracks in a group are erased, the group is
automatically deleted from the disc.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 53).
1
Select a group you want to erase and
check the contents (see page 40).
2
Press x.
3
Enter the menu to select “Edit” -
“Erase” - “Group Erase”.
4
Turn the jog dial to select “OK”, and
then press the jog dial to erase the
group.
The group is erased.
Note
Jog dial
MENU
x
To erase a track
Note
To erase a group