Asus VISTA EDITION M2N-PLUS SLI - Manual (Page 113)

ASUS M2N-Plus SLI Vista Edition 5-9
5.3 Software information
Most of the applications in the support CD have wizards that will conveniently
guide you through the installation. View the online help or readme file that came
with the software application for more information.
5.3.1 ASUS MyLogo2 ™
The ASUS MyLogo2 ™ utility lets you customize the boot logo. The boot logo is the
image that appears on screen during the Power-On-Self-Tests (POST). The ASUS
MyLogo2 ™ is automatically installed when you install the ASUS Update utility from
the support CD. See section “5.2.3 Utilities menu” for details.
To launch the ASUS MyLogo2 ™ :
1. Launch the ASUS Update utility. Refer to section “4.1.1 ASUS Update utility”
for details.
2. Select Options from the drop down menu, then click Next.
3. Check the option Launch MyLogo to replace system boot logo before
flashing BIOS, then click Next.
4. Select Update BIOS from a file from the drop down menu, then click Next.
5. When prompted, locate the new
BIOS file, then click Next. The ASUS
MyLogo2 window appears.
6. From the left window pane, select the
folder that contains the image you
intend to use as your boot logo.
• Before using the ASUS MyLogo2 ™ , use the Award BIOS Flash utility to
make a copy of your original BIOS file, or obtain the latest BIOS version
from the ASUS website. See section 4.1.4 Updating the BIOS.
• Make sure that the BIOS item Full Screen Logo is set to [Enabled] if
you wish to use ASUS MyLogo2. See section 4.6.5 Boot Settings
Configuration.
• You can create your own boot logo image in GIF, JPG, or BMP file formats.