Sony PCG-Z1VAP2 - Manual (Page 96)

Using the Programmable Buttons
As a shortcut, you can assign a pre-programmable button (P1/P2) to adjust volume or brightness, enter a power saving
mode, or switch displays. Your computer comes equipped with two built-in buttons.
Locating the P1/P2 Buttons
To assign a function to a programmable button
1. Click Start, and point to All Programs and then Sony Notebook Setup.
2. From the Sony Notebook Setup submenu, click Sony Notebook Setup.
3. Click the P1/P2 Buttons tab.
Sony Notebook Setup
4. Click to select a key assignment from the P1 and P2 drop-down menus.
5. Click Apply.
6. Depending on the key assignment, you may be able to customize theP1/P2 buttons further by clicking Advanced,
if it becomes available, in the Current Settings box.
Page 96