Sony ILCA-77M2 - Manual (Page 88)

does not show the effect, but it will be reflected in the recorded image.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO] is set to
[ISO AUTO].
[95] How to Use Using shooting functions Adjusting the exposure
Exposure compensation button
Based on the exposure value set by auto exposure, you can make the entire image brighter or darker if
you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure compensation).
Normally, exposure is set automatically (auto exposure).
1. Press the exposure compensation button.
2. Select the desired setting using the right/left side of the multi-selector.
Note
You can adjust the exposure in a range of −2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not
be able to get a satisfactory effect.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO] is set to
[ISO AUTO].
[96] How to Use Using shooting functions Adjusting the exposure
Metering Mode
Selects the metering mode that sets which part of the screen to measure for determining the exposure.
1. MENU
→
(Camera Settings)
→ [Metering Mode] → desired setting.