Sony ILCA-77M2 - Manual (Page 177)

When creating AVCHD discs using PlayMemories Home from movies recorded with the [ Record
Setting] of [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i 24M(FX)] or [24p 24M(FX)]/[25p
24M(FX)], the image quality is converted and it is not possible to create discs that have the original
image quality. Converting the image quality takes time. To record movies with the original image
quality, use Blu-ray Discs.
To create a Blu-ray Disc from movies recorded in [60p 28M(PS)]/[50p 28M(PS)], you need to use a
device that is compliant with AVCHD format Ver. 2.0. The created Blu-ray Disc can be played back
only on a device that is compliant with AVCHD format Ver. 2.0.
For details on how to create a disc, refer to the operating instructions of the device you use.
[255] How to Use Viewing on computers Creating a movie disc
Creating Blu-ray Discs
You can create Blu-ray Discs from AVCHD movies imported to a computer. The computer must be
capable of creating Blu-ray Discs. BD-R (not re-writable) or BD-RE (rewritable) discs can be used.
Multi-session recordings cannot be made. To create Blu-ray Discs using PlayMemories Home, be sure
to install the dedicated add-on software. For details, see the following URL:
http://support.d-imaging.sony.co.jp/BDUW/
To install, your computer must be connected to the Internet. For detailed operations, see the Help of
PlayMemories Home.
Note
To play back a Blu-ray Disc that was created using movies recorded in [60p 28M(PS)]/[50p 28M(PS)],
you must use a device that is compliant with AVCHD format Ver. 2.0.
[256] How to Use Precautions/This product Precautions
Precautions
Backing up memory cards
Data may be corrupted in the following cases. Be sure to back up the data for protection.
When the memory card is removed or the product is turned off during a read or write operation.
When the memory card is used in locations subject to static electricity or electrical noise.
Creating an image database file
If you insert a memory card that does not contain an image database file into the product and turn on
the power, the product automatically creates an image database file using some of the memory card’s
capacity. The process may take a long time and you cannot operate the product until the process is
completed.
If a database file error occurs, export all images to your computer using PlayMemories Home, and then