Sony ILCA-77M2 - Manual (Page 54)

temporarily.
Reducing blur is less effective even in [Hand-held Twilight] when shooting the following subjects:
Subjects with erratic movement.
Subjects that are too close to the product.
Subjects with continuously similar patterns, such as the sky, a beach, or a lawn.
Subjects with constant change such as waves or water falls.
In the case of [Hand-held Twilight], block noise may occur when using a light source that flickers,
such as fluorescent lighting.
The minimum distance that you can come close to a subject does not change even if you select
[Macro]. For the minimum in-focus range, refer to the minimum distance of the lens attached to the
product.
Hint
To change the scene, rotate the front dial on the shooting screen and select a new scene.
[40] How to Use Shooting Selecting a shooting mode
Cont. Priority AE
By fixing the aperture value when shooting the first image, you can shoot images continuously at high
speed.
1. Set the mode dial to (Cont. Priority AE).
2. Adjust the focus and shoot the image.
The camera continues to record images as long as you hold the shutter button fully pressed.
The camera records images continuously at a maximum of about 12 images per second.
Hint
If the focus mode dial is set to "C" (Continuous AF), the camera locks the focus and exposure while
shooting. ISO can be set to a desired setting.
If the focus mode dial is set to "MF" (Manual Focus), or "S" (Single-shot AF), the focus is locked to
the first image.
Note
When set to [Auto HDR], the process will temporarily be based on the DRO settings.
The speed of continuous shooting is estimated using Sony's criteria. The speed of continuous
shooting may be slower, depending on the shooting conditions.
[41] How to Use Shooting Selecting a shooting mode
Shutter Priority