Using the "quick navi" [29, Using the "quick navi, Performing settings on the dedicated screen – Sony ILCA-77M2 User Manual

Page 43

[29] How to Use

Confirming the operation method

Using the "Quick Navi"

You can change the settings directly using the Quick Navi screen when using the viewfinder.

1. Press the DISP (Display Setting) button repeatedly until the screen is set to [For viewfinder].

2. Press Fn (Function) button to switch the screen to Quick Navi screen.

3. Select the desired function by pressing the up/down/left/right side of the multi-selector.

4. Turn the front dial to select the desired setting.

Some setting values can be finely adjusted by turning the rear dial.

Performing settings on the dedicated screen

Select the desired function in step 3, then press

in the center of the multi-selector. The dedicated

setting screen for the function appears. Follow the operating guide (A) to perform the settings.