Sony CMT-L7HD - Manual (Page 62)

62 GB
Self-diagnosis display
Messages
One of the following messages may appear or
flash in the display during operations.
CD
Complete!
CD editing (Disc Memo) finished normally.
File Full
There are already 100 disc titles stored in the
system.
Initialize
The system is being initialized. You cannot load a
CD during this time. Wait until “Initialize”
disappears from the display.
No Disc
There is no disc in the CD player.
—OVER—
You have reached the end of the CD while
pressing and holding down M during playing
pause.
Push STOP!
You pressed PLAY MODE on the remote during
playback.
You pressed STORAGE MODE during playback.
You pressed STORAGE MODE during manual
recording of a CD.
Step Full!
You tried to program 26 tracks (steps) or more.
HD
Already Done
You tried to perform High-Speed Synchro Storage
for a CD that has already been completely
recorded.
Auto Cut
The system is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
Blank Disc
There is no track on the HD.
Cannot Copy
You tried to play a CD with a format that the
system does not support, such as a CD-ROM. The
sound source is a copy of commercially available
music software.
Cannot Edit
You tried to edit in Shuffle Play, or you tried to
register a track to a playlist that already contains
400 tracks.
Cannot Play
The system cannot play the track because of
damage to the audio data.
Cannot Rec
You tried to record to the HD with HD selected as
the sound source.
You tried to perform manual recording from the
CD with “AUTO” selected as the storage mode.
You pressed REC with “AUTO” selected as the
storage mode.
You tried to record a CD to the HD without
loading the CD.
Cannot STORAGE
You tried to record to the HD with less than 131
recordable tracks remaining on the HD.
You tried to record to the HD with less than 240
minutes of recordable time remaining on the HD.
You tried to perform High-Speed Synchro Storage
with no blank album in the Library area.
Check OPT-IN
A moment’s lighting is due to the signals of the
digital program being recorded. This does not
affect the recorded material.
While recording from a digital component
connected through the DIGITAL OPTICAL IN
jack, the digital connecting cable was unplugged or
the digital component turned off.
Complete!
The editing operation of the HD is completed.
The system is copying a title or artist name.
Copying
The system is copying the text data.