Sony CMT-L7HD - Manual (Page 10)

10 GB
Hooking up the system (continued)
3 Secure the speaker cords with the
speaker cord hooks at the bottom of
the main unit.
Otherwise, the speaker cord could be
damaged.
4 Connect the speaker cords.
Connect the speaker cords to the SPEAKER
jacks as shown below.
5 Connect the FM and AM antennas.
Set the AM loop antenna up before
connecting it.
To prevent noise, locate the AM loop
antenna as far away from the system as
possible.
AM antenna
FM antenna (Jack type A)
FM antenna (Jack type B)
FM antenna (Jack type C)
6 Attach the stand pads.
Attach the supplied stand pads to the bottom
of the stand to stabilize the stand and to
prevent it from slipping.
Note
Use caution when placing the stand on a specially
treated (waxed, oiled, polished, etc.) floor, as
staining or discoloration may result.
AM loop
antenna
White
Extend the FM wire antenna horizontally
Black
Extend the FM wire antenna horizontally
Bend a speaker cord slightly, insert it
into the hole and secure it with the hook.
Extend the FM wire antenna horizontally