Sony CMT-L7HD - Manual (Page 56)

56 GB
Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
Optional analog component
Optional analog component Optional digital component
To the audio input
jacks on an analog
component
From the audio
output jacks on an
analog component
To the digital input
jack on a digital
component
A DIGITAL OPTICAL IN jack
Use a digital optical cable (square, not
supplied) to connect an optional digital
component (such as a digital satellite
receiver) to this jack. You can then record
or listen to digital audio from that
component through this system.
B DIGITAL CD OPTICAL OUT jack
Use a digital optical cable (square, not
supplied) to connect an optional digital
component (such as an MD deck) to this
jack. You can then output digital audio to
that component from this system.
C MD/TAPE IN jack
Use an audio cord (not supplied) to connect
an optional component (such as an MD
deck or a cassette deck) to this jack. You
can then record or listen to analog audio
from that component through this system.
D MD/TAPE OUT jack
Use an audio cord (not supplied) to connect
an optional component (such as an MD
deck or a cassette deck) to this jack. You
can then output analog audio to that
component from this system.
E USB connector
Connect a personal computer with the
supplied USB cable. This allows you to
control the system from a computer in
which the supplied M-crew for CMT-L7HD
is installed.
Personal computer
Optional digital component
From the digital
output jack on a
digital component
To the computer’s
USB port