Sony CMT-L7HD - Manual (Page 42)

42 GB
Timer recording radio
programs
Before recording with the timer, make sure that
you have set the system clock correctly (see
“Setting the clock” on page 13) and preset the
radio station (see “Presetting radio stations” on
page 37).
1
Tune in the desired preset radio station
(see “Listening to the radio” on page
38).
2
Press CLOCK/TIMER SET on the
remote.
3
Press MENU + or – on the remote
repeatedly until “REC SET?” appears in
the display, and then press ENTER/YES
on the remote.
4
Press MENU + or – on the remote
repeatedly to select one of “REC 1” to
“REC 3”, and then press ENTER/YES
on the remote.
5
Press MENU + or – on the remote
repeatedly until “ONCE?”, “DAILY?” or
“WEEKLY?” appears.
If you select “ONCE?”, the timer-recording
activates only once. If you select
“DAILY?”, the timer activates at the same
time every day. If you select “WEEKLY?”,
the timer activates at the same time on the
set day of every week.
6
Press ENTER/YES on the remote.
If you select “ONCE?” or “WEEKLY?”,
the day indication starts flashing. If you
select “DAILY?”, the hour indication starts
flashing.
7
Press MENU + or – on the remote
repeatedly to select the desired day.
If you select “DAILY?” in step 5, proceed
to step 9.
8
Press ENTER/YES on the remote.
The hour indication flashes.
9
Set the starting time.
Press MENU + or – on the remote
repeatedly to set the hour, and then press
ENTER/YES on the remote.
The minute indication begins flashing next.
Press MENU + or – on the remote
repeatedly to set the minute, and then press
ENTER/YES on the remote.
The day indication or the hour indication
flashes again.
10
Set the stopping time by repeating step
7 to 9.
The timer-recording settings appear, then
the original display returns.
11
Press MENU + or – on the remote
repeatedly to specify the number of the
album in the Flexible area to be
recorded.
12
Press ENTER/YES on the remote.
13
Press @ / 1 to turn off the system.
To
Check the settings
Activate/Cancel
the timer
Do this
Select the timer number
(REC 1 to 3) in step 2 of
“Activate/Cancel the
timer”, then press ENTER/
YES on the remote. The
last setting appears.
1 Press CLOCK/TIMER
SELECT on the remote,
then press MENU + or –
on the remote repeatedly
until “TIMER SELECT?”
appears and press
ENTER/YES on the
remote.
2 Press TCURSOR or
CURSOR t on the
remote repeatedly to
select the timer number
(REC 1 to 3), then press
MENU + or – on the
remote repeatedly to
select the timer number
(to activate the timer) or
“–” (to cancel the timer)
and press ENTER/YES
on the remote. If you have
not set the timer-
recording, “.” appears
instead of the timer
number or “–”.