Sony CMT-L7HD - Manual (Page 30)

30 GB
HD - Editing
Before editing
• You can edit an HD track only when the HD
play mode is Normal Play.
• You cannot edit HD tracks during Auto
Storage or High-Speed Synchro Storage.
To cancel the last edit
Use Undo function to cancel the last edit and
restore the contents of the HD to the condition
before the edit.
To quit while editing
Press MENU/NO on the remote or HD x.
Labelling a track, album
or playlist
— Name Function
You can enter a title or artist name for albums
and playlists as well as for individual tracks.
During recording (track name only)
During Auto Storage/High-Speed Synchro
Storage, CD-TEXT information is recorded
automatically.
To cancel recording the CD-TEXT information
automatically, change the setting as follows.
Use the remote for the operation.
After pressing FUNCTION repeatedly to
switch the function to “HD”, press MENU/NO,
press MENU + or – repeatedly until “Setup?”
appears, then press ENTER/YES. Press
MENU + or – repeatedly until “TextSave On”
appears, then press ENTER/YES. Again, press
MENU + or – repeatedly until “TextSave Off”
appears, then press ENTER/YES, then press
MENU/NO. The factory setting is “On”.
Notes
• Even when “TextSave Off” is selected, the CD-
TEXT information is recorded automatically
depending on the disc.
• If CD-TEXT information is not recorded, the track
numbers on the CD (“Tr**:”) are automatically
recorded instead.
After recording
Use Name function.
Name can consist of uppercase and lowercase
letters, numbers and symbols. Up to 127
characters can be entered for each name.
Notes
• You cannot name an album or playlist during
recording.
• You cannot name tracks in a playlist. Track names
in a playlist cannot be erased or changed.
Assigning a title or artist
name
1
Press FUNCTION repeatedly until “HD”
appears in the display.
2
Press MENU/NO on the remote after
selecting the album you want to edit.
“Edit Menu” appears in the display.
3
Press MENU + or – on the remote
repeatedly until “Nm In?” flashes in the
display, then press ENTER/YES on the
remote.
4
Press MENU + or – on the remote to
select the item, then press ENTER/YES
on the remote.
To
Assign a title to a track,
album or playlist
Assign an artist name
to a track, album or
playlist
5
Press MENU + or – on the remote to
select the item, then press ENTER/YES
on the remote.
To
Name a track
Name an album or
playlist
A flashing cursor appears.
The system starts playing and you can
assign a title or artist name while
monitoring the sound. (for track only)
Select
Nm in Title.
Nm in Artist.
Select
A track number.
An album.