Sony MDR-HW700DS User Manual
Mdr-hw700ds, Help guide
Table of contents
Document Outline
- Help Guide MDR-HW700DS
- Table of Contents
- Getting Started
- Connection
- Connecting digital devices with HDMI jacks
- Notes on HDMI connections
- What is ARC?
- Connection example 1: Connecting the processor with devices without using an AV amplifier (ARC equipped TV)
- Connection example 2: Connecting the processor with devices without using an AV amplifier (TV not equippedwith ARC)
- Connection example 3: Connecting the processor with devices via an AV amplifier (ARC equipped TV)
- Connection example 4: Connecting the processor with devices via an AV amplifier (TV not equipped with ARC)
- Connection example 5: Connecting playback devices to the processor via an AV amplifier
- Connecting other devices
- Connecting digital devices without HDMI jacks
- Notes on the digital and analog audio connections
- Connecting digital devices with HDMI jacks
- Operation
- Enjoying audio and video entertainment
- Selecting the audio effects
- Selecting the frequency band
- Using the menu
- What you can do with the menu
- Using the menu on the processor
- Using the menu on the headphones
- Displaying the current status of the system
- Adjusting the volume level of the center channel
- Adjusting the volume level of the subwoofer channel
- Synchronizing the sound and the image (A/V Sync)
- Selecting a channel when receiving a multiplexbroadcast signal
- Selecting simultaneous audio output to a TV speaker andthe headphones
- Selecting the Control for HDMI function
- Selecting the HDMI Pass Through function
- Selecting the front display mode of the processor
- Resetting the settings
- Others
- Troubleshooting
- What can I do to solve a problem?
- Possible causes of symptoms
- Table of contents for symptoms and possible causes
- No sound
- No sound, no video
- No TV sound can be heard on the system
- No sound is output from the TV or the AV amplifier connected to the HDMI OUT jack of the processor
- No sound from the device connected to the AV amplifieris heard on the system
- The CONTROL FOR HDMI switch is set to “MODE1,” but the headphone volume cannot be adjusted from the TV
- The TV is turned on, but the processor does not turn on automatically.
- Wireless LAN of the TV is difficult to connect
- Distorted or intermittent sound (sometimes with noise)
- Low sound
- The surround sound effect is not obtained.
- The MATRIX indicator does not turn on, or flashes
- The audio is not played back in the desired audio format
- The battery cannot be charged; the charge indicator flashes.
- No signal is output from the TV (OPT) OUT (THROUGH) jack of the processor
- Beeps are heard from the headphones
- No sound is heard from either the TV or the headphones.
- The menu screen does not appear on the TV
- No sound (When devices are connected to the HDMI jacks)
- The power off interlock function does not work
- The Control for HDMI function (“BRAVIA” Sync) does notwork properly
- The processor turns off when you turn off the TV.
- Specifications
- Important information
- Contents list