Sony MDR-HW700DS - Manual (Page 45)

Help Guide
MDR-HW700DS Top > Connection > Connecting digital devices without HDMI jacks >
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
Contents list
When the volume of analog devices is too low
Change the ATT (LINE IN) switch on the left side of the processor to “0dB.”
Switch position Devices connected
0dB Devices with low output level, such as portable devices
–8dB (default setting) Other devices
Notes
Make sure that you turn down the volume before using the ATT (LINE IN) switch.
When the sound of analog devices is distorted (with noise, etc.), change the ATT (LINE
IN) switch to “–8dB.”
When you connect a device to the TV (OPT) jacks (optical digital audio input/output
jacks)
© 2014 Sony Corporation
41
Search