Sony MDR-HW700DS - Manual (Page 26)

Help Guide
MDR-HW700DS Top > Getting Started > Turning the system on or off >
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
Contents list
Turning off the processor
Power saving function of the processor
If you are not using the system for the time being or for a long time, you can reduce the
power consumption of the system, if necessary.
1.
Press and hold the / (power) button down until the power indicator goes off
(more than 3 seconds).
Goes off
Note
When the processor is turned off, the transmission of HDMI output signals also stops so
the HDMI Pass Through function
[Details] is disabled. In this state, the processor is not
turned on automatically when you next turn on the headphones. You must turn on the
processor using the
/ (power) button or the Control for HDMI function.
Tip
When the processor and headphones are on, if no signal is input to the selected input
jack and no operation is attempted on the system for more than 20 minutes, the
processor turns off automatically.
Related topic
Using HDMI devices efficiently
Turning on the processor
Setting the processor to standby mode
Turning on the headphones
© 2014 Sony Corporation
22
Search