Advanced mode – Sony DSC-TX55 User Manual

Page 136

(Advanced)

turn green.

When two frames are shot, the two images are displayed side by side

immediately after shooting.

When [Anti Blink] is displayed, 2 images are taken automatically and the

image with the eyes open is selected automatically.

[Details]

Notes

The Scene Recognition function does not operate when you shoot images using zoom
functions other than the optical zoom.

(Portrait),

(Night Portrait) or

(Backlight Portrait) are not recognized in tracking

focus mode.
The available flash settings are [Auto] and [Off].
These scenes may not be recognized depending on the situation.
If the environment causes vibrations to be transferred to the camera when (Tripod) and
(Night Scene) conditions are recognized at the same time, (Tripod) condition may not be
recognized.
Sometimes a slow shutter results when a scene is recognized as a (Tripod) and (Night
Scene) at the same time. Keep the camera still during shooting.
You may not be able to set some MENU items depending on the selected REC mode. For
details, see “MENU items not available in some REC modes.”

[Details]

Advanced mode

In [Advanced] mode, the camera shoots two images consecutively with the settings differing as
follows when it recognizes (Night Scene),

(Night Portrait), (Backlight) or

(Backlight

Portrait) scenes, which tend to blur. You can select the desired image from the two images shot.

First Image*

Second Image

Shoots in Slow Synchro

Shoots with sensitivity increased and shake

reduced

Shoots in Slow Synchro with the face

which the flash strobes on as guide

Shoots with sensitivity increased with the face

as guide and shake reduced

Shoots in Slow Synchro

Shoots with even slower shutter speed without

increasing sensitivity

Shoots with the flash

Shoots with the brightness and contrast of the

background adjusted

Shoots with the face which the flash

strobes on as guide

Shoots with the brightness and contrast of the

face and the background adjusted

* When [Flash] is set to [Auto].

What is the Anti Blink function?

When set to [Advanced], the camera automatically shoots two images consecutively* when it
recognizes (Portrait) or

(Infant). The camera will select, display, and record the image

which the eyes are not blinked automatically. If the eyes are closed in both images, the
message “Blinked eye detected” is displayed.
* except when the flash strobes/when the shutter speed is slow.

136