Sony HAP-S1 - Manual (Page 72)

HDD AUDIO PLAYER
HAP-S1
Prep 4. Configuring the initial settings of the HDD AUDIO PLAYER
When you turn on the HDD AUDIO PLAYER for the first time, it automatically enters the initial settings
mode. You can configure the initial settings of the HDD AUDIO PLAYER easily by following the instructions
on the screen.
Refer to each related topic for details on each item of the initial settings.
1. Press to turn on the HDD AUDIO PLAYER.
2. Configure the initial settings by following the instructions on the screen.
When a screen appears to indicate that the initial settings are completed, select [Close].
Related Topic
Connecting the HDD AUDIO PLAYER to a network automatically
Connecting the HDD AUDIO PLAYER to a network manually
Method 1. Setting up a network connection using the WPS push button configuration method
Method 2. Setting up a network connection by selecting an access point
Method 3. Setting up a network connection by adding a new access point
Method 4. Setting up a network connection using the (WPS) PIN code configuration method
Selecting the language to be displayed on the screen (Language)
Setting the Network Standby function (Network Standby)
Notes on use
4-472-853-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
72