Installation (nwz-e473k/e474k only) – Sony NWZ-E475BLK User Manual
Page 56

Search
Making/ Playing Voice
Recordings
Top page > How to Use the Speaker > Parts and Controls of the Speaker > Installation (NWZ-
E473K/E474K only)
Installation (NWZ-E473K/E474K only)
Note
Do not place the speaker in an inclined position.
Do not place the speaker in locations that are hot or subject to direct sunlight, dust, high
humidity, or extreme cold.
Use caution when placing the speaker on a specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
1. Install your Walkman on the speaker.
Note
Make sure that the WM-PORT of the speaker is securely inserted into the WM-PORT jack
of your Walkman.
When a strap is attached to your Walkman, be sure not to pinch the strap cords between the
Walkman and the WM-PORT of the speaker.
When installing your Walkman on the speaker, keep the adjuster attached to the speaker. If
the Walkman is installed on the speaker without the adjuster, the WM-PORT of the speaker
may be damaged.
Copyright 2012 Sony Corporation
56