Conventions, General, Physical dimensions – Avaya S8710 User Manual
Page 10: Terminology, Typography, Conventions 10, Typography 10
About This Documentation
Conventions
10
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
To complete the installation, you install the media gateways, using sections in Installing the Avaya G650
Media Gateway (03-300144).
Connect the system to the customer’s network using information in
Complete the installation using information in the following sections:
•
Completing the installation administration
•
Testing the media server installation
•
If problems occur during the installation, use
Troubleshooting an installation
on page 89 to try to resolve
them.
Conventions
This section describes the conventions that we use in this book.
General
We show commands and screens from the newest Avaya Communication Manager and refer to the most
current documentation.
Physical dimensions
All physical dimensions are in English units followed by metric units in parentheses. Wire gauge
measurements are in AWG followed by the diameter in millimeters in parentheses.
Terminology
We use the following terminology in this documentation:
•
Configuration is a general term that encompasses all references to an Avaya media server with
media gateways running Avaya Communication Manager.
•
Cabinet refers to a stack of media gateways (such as the G650) that are TDM-cabled together. It is
the same as a port network. It can also refer to the MCC1 (multi-carrier cabinet).
•
UUCSS refers to a circuit pack address in cabinet-carrier-slot order.
Typography
This section describes the typographical conventions for commands, keys, user input, system output, and
field names.