beautypg.com

Connecting the power cord – Apple Color OneScanner 600/27 User Manual

Page 23

background image

Connecting the power cord

Follow these steps to connect the power cord to the scanner:

1

Align the holes in the socket end of the power cord with the pins of the power cord

socket on the back of the scanner.

2

Plug the socket end of the power cord into the pins on the scanner.

3

Plug the other end of the power cord into a standard electrical outlet that accepts a

three-pronged plug.

You’re now ready to switch the scanner on and install the scanner software.

Power cord plug

WARNING

This equipment is intended to be electrically grounded. Your

Apple Color OneScanner is equipped with a three-wire grounding
plug—a plug that has a third (grounding) pin. This plug will fit only a
grounded AC outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact a licensed electrician to replace the
outlet with a properly grounded outlet. Do not defeat the purpose of the
grounding plug!

15

Setting Up the Scanner

This manual is related to the following products: