Connecting the scsi cable – Apple Color OneScanner 600/27 User Manual
Page 22
Connecting the SCSI cable
Follow these steps to connect the scanner directly to your computer.
1
Plug the large end of the SCSI cable into the back of the scanner, and push the retaining
clips into the tabs.
2
Plug the small end of the SCSI connector into the back of the Macintosh, as shown.
3
Gently tighten the thumbscrews on the cable.
You’re now ready to attach the power cord.
SCSI cable
Retaining clip
Retaining tab
14
Chapter 2
This manual is related to the following products: