Apple AppleVision 850 - Manual (Page 50)

Connecting all audio and video cables to the back of your computer
When you record a video with sound, you can connect all the video
equipment to the back of your computer if your computer has S-video or
composite
video ports as well as sound input and sound output ports for the monitor’s
sound cable.
To set up your computer for this configuration, follow these steps:
1 Assemble the cables you need to connect the VCR.
You need the following cables (available at an electronics supply store):
m video cable with S-video connectors or RCA plugs at each end (If you’re
using a video cable with RCA plugs, you’ll also need an adapter cable if
your computer does not have a composite video port.)
m audio cable with dual RCA plugs at one end and a 3.5-mm stereo miniplug
at the other end
m audio cable with dual RCA plugs at each end
2 Attach one end of the video cable into the Video Out port on the VCR.
Follow the instructions that came with the VCR.
Dual RCA plug
Stereo miniplug
RCA
S-video S-video
RCA RCA S-video
Adapter for composite video
50 Chapter 3