Apple AppleVision 850 - Manual (Page 12)

Connecting the power cord
1 Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
2 Plug the other end of the power cord into a grounded outlet or power strip.
Note: You may have a power jumper cord instead of a power wall cord. In
this case, plug the power jumper cord into the power socket on the back of
your computer.
Connecting the monitor cable to a Mac OS–based computer
Connecting to a standard monitor port
To realize the full capability of your monitor, you must connect it to the video
and ADB ports on your computer. The monitor cable is a split cable with two
connectors, one for video and one for the Apple Desktop Bus (ADB).
ADB connector
Monitor cable
Monitor connector
AppleVision
850
AV Display
12 Chapter 1