Apple AppleVision 850 - Manual (Page 17)

Connecting sound equipment to your AppleVision 850
AV
Display
Connecting the sound cable
The sound cable on your monitor is a split cable with two connectors, one for
sound input (such as a microphone or audio CD) and one for sound output
(such as a speaker).
Plug these connectors into your computer to use the built-in microphone and
speakers on your AppleVision 850
AV Display. (This feature is not available on
the AppleVision 850 Display.)
1 Plug the connector (marked by
≈
) on the sound cable into the sound input port on
your computer.
For Mac OS–based computers, the port (marked by
≈) is on the back of the
computer. For Windows-based computers, the connector (marked by
≈) fits
most standard microphone jacks. The sound input port on a Windows-based
computer may be located on a sound or multimedia card.
On some Windows-based computers, the connector (marked by
≈) on the
sound cable should only be plugged into the line level input port of your
sound card. See the documentation that came with your sound card to
determine where the appropriate line level input port is located.
2 Plug the connector (marked by
-
) on the sound cable into the sound output port on
your computer.
For Mac OS–based computers, the port (marked by
-) is on the back of the
computer. For Windows-based computers, the connector (marked by
_) fits
most standard speaker jacks. The sound output port on a Windows-based
computer may be located on a sound or multimedia card.
≈
Connector
-
Connector
17 Setting Up Your Monitor