Avocent CCM - Manual (Page 94)

80 CCM Installer/User Guide
Show Port In/Out command
The Show Port In/Out command displays the translation settings for all ports. These translation
settings indicate how carriage returns and linefeeds are treated in incoming and outgoing serial data.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT IN|OUT
Show Server command
The Show Server command displays CCM appliance configuration information, statistics and the
current time.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER
Table 5.32: Show Server Command Display Fields
Field Content
Server IP address (from initial configuration or Server Set command).
Mask Subnet mask (from initial configuration or Server Set command).
Gateway Gateway IP address (from initial configuration or Server Set command).
Up Time Days, hours, minutes and seconds since unit was rebooted.
MAC Ethernet MAC address.
S/N Serial number.
Port Port number.
Username Username (from User Add command).
Duration Duration of session.
Socket Telnet socket number.
From Socket Telnet client IP address with socket number in parentheses.
IP Input and Output Network IP statistics, including number of packets delivered, discarded and fragments.
TCP Network TCP statistics, including in segs, out segs, errors and retransmissions.
UDP Network UDP statistics, including in, out, errors and no port events.
BOOT BIOS/Bootstrap version, date and time.